Showa Nature Living is a exclusive development located in the beautiful Praia da Costa, in Vila Velha, one of the 22 Brazilian beaches with “Blue Flag” seal of excellence. Located just one block from the sea and with complete leisure in more than 2,000 square meters and apartments carefully designed. an adventure of
approximately 33,000m² of surface built, with the first
The slab planes present certain 3,000m².
Start and planned end:
January/2023 to January/2024.
Compliance with the volume of approximately 3,200m² of Topec® SH. We solve the challenge with transfers and with full support of the maintenance of forms.
Serve the customer with a solution that would elevate you productivity, such as construction has approximately 33,000 m² of constructed area, with the first slab fabrics have around 3,000 m², being the perfect setting for system use shoring with shapes
Topec® SH.
METALLIC PROFILES,
BARS WITH NUTS,
TOPEC ® SH SUPPORTS AND FORMS.
Lume Anchor x Cracks in containment;
Hollow profiles, bars and nuts x Pillar lock;
Forma Topec ® SH x Shoring of prestressed slabs;
Shoring x Re-shoring of slabs.
SH is recognized for the quality and efficiency of its services in large projects. But we are not the ones who say that. The person who says this is one of the professionals involved, who had a partnership with SH.
I worked with LTT in the past and it was a great service for us, but when I met TOPEC it was wonderful, very good. Clean work, with little Very fast shoring and assembly. My The team is made up of 4 to 5 people and they meet for about 200 pieces a day, which is equivalent to about 400 m². They are two carpenters doing installations and two or three assistants doing vertical transportation, all with 8-hour shifts.
Regarding the cost they say it is a little more. high, but the work dynamics are different. In other systems of shoring, the plywood arrives with a terrible quality on the upper floors and with TOPEC we do not have this problem. Furthermore, we do not have to worrying about maintenance, changing the plate, nothing. SH management is very flexible with problems.
bureaucratic, such as the need to delete more material urgently or in relation to changes in project. I would recommend SH to other professionals and, if If I change construction companies, I will insist very much on continuing to work with you.
TOPEC is an easy-to-use device, it is not It is necessary to carry many tools and the service costs more. The erection time of conventional shoring is completely different from that of TOPEC shoring.
Mounting the panels from below is more complicated.
I consider that mounting from above is more. Quick and practical, two pull the material to the edge and
two place the already raised strut underneath. With this, the effort is much less. Using this way of assembling,
I normally install 250 pieces per day, unfinished
